Jual Radio HF SSB ICOM IC 7300
New technology is changing the way receivers are being designed and the IC-7300 is an industry first as an RF, Direct Sampling System is being used in an entry level HF radio. The ability to digitize RF before various receiver stages reduces the inherent noise that is generated in the different IF stages of a radio. We feel the performance of the ‘7300 will far exceed your expectations for a radio considered entry level.
DESCRIPTION
Radio HF SSB ICOM IC 7300 merupakan teknologi baru mengubah cara penerima dirancang untuk Sistem Pengambilan Sampel Langsung digunakan dalam radio HF entry level. Kemampuan untuk mendigitalkan RF sebelum berbagai tahap penerima mengurangi noise bawaan yang dihasilkan dalam berbagai tahapan IF radio. Kami merasa kinerja ‘7300 akan jauh melebihi harapan Anda untuk level entri radio.
Daya Output: | 100W (25W AM) | |
Frekuensi RX: | 0.030-74.800 | |
Tipe Receiver: | Direct sampling |
ICOM IC 7300 IC-7300 menggunakan sistem pengambilan sampel langsung RF, di mana sinyal RF langsung dikonversi ke data digital. Kemudian diproses dalam FPGA (Field-Programmable Gate Array), sehingga memungkinkan untuk menyederhanakan konstruksi rangkaian serta mengurangi kebisingan yang dapat menutupi sinyal lemah. “IP +” baru meningkatkan kinerja titik intersep urutan ketiga (IP3) meningkatkan kemampuan untuk menyalin sinyal lemah yang berdekatan dengan sinyal interferensi kuat. Dalam proses ini, konverter A / D dioptimalkan untuk mengurangi atau menghilangkan distorsi sinyal.
Specifikasi Radio HF SSB ICOM IC 7300
General |
|
---|---|
Frequency coverage RX TX | 0.030–74.800** 1.800–1.999, 3.500–3.999, 5.255–5.405*, 7.000–7.300, 10.100–10.150, 14.000–14.350, 18.068–18.168, 21.000–21.450, 24.890–24.990, 28.000–29.700, 50.000–54.000 * Some frequency bands are not guaranteed. ** Guaranteed range: 0.500–29.999, 50.000–54.000MHz. |
Mode | SSB, CW, RTTY, AM, FM |
Number of channels | 101 (99 regular, 2 scan edges) |
Antenna connector | SO-239 (50Ω) |
Power supply requirement | 13.8V DC ±15% |
Power Consumption | Tx: 21A (at 100W output power) Rx: 0.9A typical (Standby), 1.25A (Maximum audio) |
Operating temperature range | –10˚C to +60˚C; 14˚F to 140˚F |
Frequency stability | Less than ±0.5ppm (–10˚C to +60˚C; 14˚F to 140˚F) |
Frequency resolution | 1Hz |
Dimensions | 240×94×238mm; 9.45×3.7×9.37in (projections not included) |
Weight (approximately) | 4.2kg; 9.26 lb |
Transmitter |
|
---|---|
Output power (HF/50MHz) | SSB/CW/FM/RTTY: 2–100W, AM: 1–25W |
Modulation system SSB AM FM | Digital P.S.N. modulation Digital Low power modulation Digital Reactance modulation |
Spurious emission | Less than –50dB (HF bands), Less than –63dB (50MHz band) |
Carrier suppression | More than 50dB |
Unwanted sideband | More than 50dB |
Microphone impedance | 600Ω |
Receiver |
|
---|---|
Receiver system | Direct Sampling |
Intermediate frequency | 36kHz |
Sensitivity* SSB/CW (at 10dB S/N) 0.5–1.8MHz 1.8–29.995MHz 28.0–29.7MHz 50MHz band AM (at 10dB S/N) 0.5–1.8MHz 1.8–29.995MHz 28.0–29.7MHz 50MHz band FM (at 12dB SINAD) 0.5–1.8MHz 1.8–29.995MHz 28.0–29.7MHz 50MHz band | – 0.16μV – 0.13μV 12.6μV 2.0μV – 1.0μV – – 0.5μV 0.25μV * HF: Preamp 1 ON, 50MHz: Preamp 2 ON |
Squelch sensitivity* (Threshold) SSB: Less than 5.6μV, FM: | Less than 0.3μV * HF: Preamp 1 ON, 50MHz: Preamp 2 ON |
Selectivity (sharp filter shape) SSB (BW: 2.4KHz) CW (BW: 500Hz) RTTY (BW: 500Hz) AM (BW: 6kHz) FM (BW: 15kHz) | More than 2.4kHz/–6dB Less than 3.4kHz/–40dB More than 500Hz/–6dB Less than 700Hz/–40dB More than 500Hz/–6dB Less than 800Hz/–40dB More than 6.0kHz/–6dB Less than 10kHz/–40dB More than 12.0kHz/–6dB Less than 22kHz/–40dB |
Spurious and image rejection ratio | HF: More than 70dB 50MHz: More than 70dB (Except for ADC Aliasing) |
Audio output power | More than 2.5W (at 10% distortion with an 8Ω load, 1kHz) |
Tuner |
|
---|---|
Frequency range | 1.9–50MHz bands |
Matching impedance range | 16.7Ω–150Ω unbalanced (VSWR better than 1: 3) |
Tuning accuracy | VSWR 1: 1.5 or less |
Tuning time | 2–3 seconds (Maximum 15 seconds) |